Commercial Ventilation Air Handling Unit Ceiling Type Mounted Water
|External static pressure||Pa||150|
|Supply fan||Type||Centrifugal type|
|Drive method||Direct drive|
|Evaporator||Type||Copper tubes with aluminium fins|
|Condenser||Type||Shell and tube type|
|Inlet/outlet water temp.||ºC||30 /35 ºC( connecting with cooling tower system)|
|Connecting pipe size||mm||DN40|
|Throttle method||External expansion valve|
|LCD display screen, automatic microcomputer|
controller, failure alarm,balance operation time, imer on/off,etc
1. Water source heat pump unit has higher efficiency than air
cooled heat pump unit, reduce power consumption, new popular unit;
2. No need machine room, lower investment cost;
3. The heat pump unit can be connected to user's ammeter and the
user will only responsible
for own air conditioning and heating charges, charge as per family.
4. Copper tubes with aluminium fins evaporator, optional
hydrophilic aluminium fins, copper fins.
5. Condenser: shell and tube type, high heat exchange efficiency,
could be cleaned through mechanical or chemical method, more easier
6. Microcomputer controller: simple interface, adjust temperature
automatically, convenient for operation and easy for maintainance.
7. Refrigerant available: R22,R407C, R410A.
WIDE AIR FLOW RANGE
Standardly, ceiling concealed type AHU air flow ranges from 1500 to
15000m3/h; horizontal/vertical type AHU air flow ranges from 2000
to 40000m3/h, able to fulfill various application requirements.
Meanwhile, bigger air flow is available by tailor-made as customer
PANEL STRUCTURE DESIGN
Panel is made of powder coated double steel (outer and inner both)
with high pressure polyurethane foam fitting in between, thus
offering a rigid and robust panel.
Frame is made of aluminum alloy which is fastened to the panel, as
a result, the unit is strong and lightweight.
LOW AIR LEAKAGE
Thanks to the high pressure PU foam fitting, and special design
insulation method to guarantee no low air leakage, to best minimize
loss of energy.
Thanks to the rigidly bolted panel, dynamically and statically
balanced fan assembly with spring isolator and closely integrated
section, maximum to reduce the vibration and noise.
*Tell customers how to use our products and matters needing
* Guide customers to choose the best and economic product, recover
the investment within short time. .
* Site inspection if you need.
* If the project needs our installation guidance, we can send our
engineer and translator. We can also send customers installation
video to teach them how to fix and operate with our product.
*Usually, our product warranty is 18 months after leaving factory
or 12 months after installation. Within this months, all parts broken will be responsible for our factory.